Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Bullets, Spades & Ring Terminals

Online Catalogue | Wiring Supplies |  Bullets, Spades & Ring Terminals

Page:  1  2   >   >>   View All (16) Page:  1  2   >   >>   View All (16)
1mm² straight butt connectors/heat shrink

1mm² straight butt connectors/heat shrink

Splice or butt connector to be used with 1mm² wire. Pack contains 5off together with heat shrink insulation. These require a tube type crimp tool. We have discovered that the Electrician's Scissors will actually crimp this product successfully.

Price: £1.49 (Excluding VAT at 20%)

Quantity:

2mm² straight butt connectors/heat shrink

2mm² straight butt connectors/heat shrink

Splice or butt connectors suitable for joining 2mm² wire or a number of 1mm² wires

Pack contains 5off together with heat shrink insulation.

These require a tube type crimp tool. We have discovered that the Electrician's Scissors will actually crimp this product successfully.

Price: £1.59 (Excluding VAT at 20%)

Quantity:

4mm² straight butt connectors/heat shrink

4mm² straight butt connectors/heat shrink

Splice or butt connectors suitable for joining 6mm² wire or a number of 1mm² or 2mm² wires

Pack contains 5off together with heat shrink insulation.

Price: £2.33 (Excluding VAT at 20%)

Quantity:

3.9mm Male Bullet Connectors

3.9mm Male Bullet Connectors

3.9mm bullet connectors are widely used on all Japanese motorycycles. These are the professional solution to joining single wires on a motorcycle. They not only look neat and professional, but they are safe.These connectors are made from brass and are tin plated to protect against corrosion

We usually squirt a little Corrosion Block Grease or Electrical Silicone Compound into the female before finally inserting the male to give the joint an extra level of protection against the elements

We supply these non-insulated connectors with the insulators required. To use these connectors you will need a non-insulated crimp tool.

Quantity:

Pack Size

3.9mm Female Bullet Connectors

3.9mm Female Bullet Connectors

3.9mm bullet connectors are widely used on all Japanese motorycycles. These are the professional solution to joining single wires on a motorcycle. They not only look neat and professional, but they are safe.These connectors are made from brass and are tin plated to protect against corrosion

We usually squirt a little Corrosion Block Grease or Electrical Silicone Compound into the female before finally inserting the male to give the joint an extra level of protection against the elements

We supply these non-insulated connectors with the insulators required. To use these connectors you will need a non-insulated crimp tool.

Quantity:

Pack Size

3.9mm Double Female Bullet Connectors

3.9mm Double Female Bullet Connectors

3.9mm bullet connectors are widely used on all Japanese motorycycles. These are the professional solution to joining single wires on a motorcycle. They not only look neat and professional, but they are safe.These connectors are made from brass and are tin plated to protect against corrosion

We usually squirt a little Corrosion Block Grease or Electrical Silicone Compound into the female before finally inserting the male to give the joint an extra level of protection against the elements

We supply these non-insulated connectors with the insulators required. To use these connectors you will need a non-insulated crimp tool.

Quantity:

Pack Size

Double Crimp Ring Terminals

Double Crimp Ring Terminals

Non-Insulated double crimp ring terminals for 1 - 3mm² wire for various bolt/stud sizes. We always insulate the crimped part with heat shrink making a safer and neater job. In the photos above (click image to enlarge) you can see that we have used a colour of heat shrink to match the wire colour.

You will need a non-insulated crimp tool for these terminals and we would recommend the ratcheting type; you'll only buy it once!

Quantity:

Hole Size and Pack size

6.3mm Female Blade

6.3mm Female Blade

6.3mm is by far the most common spade connector and is often used to connect to fuse boxes, relays and flasher units. It was also known as a Lucar connector in past years, but is more commonly refered to as a spade or blade connector these days.

We supply these non-insulated terminals with the appropriate clear sheath insulators.

You will need a non-insulated crimp tool for these terminals and we would recommend the ratcheting type; you'll only buy it once!

Quantity:

Pack Size

Brass Bullet for 2mm² Wire

Brass Bullet for 2mm² Wire

Brass bullets for British Motorcycles for 2mm² wire.

These are designed to be soldered or , though we would advise against soldering on motorcycles as this effectively renders the multistrand wire a single conductor which is can suffer stress fractures due to the vibration, especially prevalent on British singles and twins.

Supplied in packs of 10.

Price: £1.48 (Excluding VAT at 20%)

Quantity:

Brass Bullet for 1mm² Wire

Brass Bullet for 1mm² Wire

Brass bullets for British Motorcycles for 1mm² wire.

These are designed to be soldered or , though we would advise against soldering on motorcycles as this effectively renders the multistrand wire a single conductor which is can suffer stress fractures due to the vibration, especially prevalent on British singles and twins.

Supplied in packs of 10.

Price: £1.48 (Excluding VAT at 20%)

Quantity:

Single Connectors for Brass Bullets

Single Connectors for Brass Bullets

Single connector to join together 2 brass bullets as used on classic and vintage British motorcycles

Supplied in packs of 5 or 10.

Quantity:

Pack size

Double Connector for Brass Bullets

Double Connector for Brass Bullets

Double connector to join together upto 4 brass bullets as used on classic and vintage British motorcycles

Supplied in packs of 3 or 10.

Quantity:

Pack size

Page:  1  2   >   >>   View All (16) Online Catalogue > Wiring Supplies > Bullets, Spades & Ring Terminals