Electrical Tools

Page: << < 1 2 3 4 > >> View All (38) Page: << < 1 2 3 4 > >> View All (38)

British Brass Bullet Crimp and Fitting Tools

British bike electrics were legendary for their lack of reliabilty causing that well know phrase - Lighting by Lucas - the prince of darkness

Part of the problem was that many of the brass bullets were soldered on. One should not solder anything on a bike if not essential because the molten solder is drawn into the multi-strand flexible wire by capillary action makeing the wire a single conductor wire and vulnerable to suffering stress fractures caused by the not inconsiderable vibration found in classic British singles and twins. Another issue is the brass corroding which can be minimised by covering the bullets and sockets in a dielectric grease of corrosion block grease.

These tools can put an end to the delights of soldering bullets. The crimp tool will fit the bullets nicely and the fitting tool squeezes the bullets into sockets which isn't a fun job without this tool

Price: £26.74 (Excluding VAT at 20%)

Quantity:

Click for larger image

People who bought this item also bought:

1. 1mm² Thin Wall Cable

2. 2mm² Thin Wall Cable

3. PVC Sleeving

Electrical Heat Shrink Kit

Complete kit for fitting heat shrink insulation to electrical wiring. This comprehensive kit contains different coloured heat shrink in a variety of different sizes together with a neat little gas torch which is fueled from readily available cigarette lighter gas (Gas not included). The totch has piezo electric self ignitor, so no messing about with matches. If is fabulously portable.

We have always used an electric heat gun in our workshop, and so were sceptical of the value of such kit, but still took one on to try. We were very surpised at how usable the kit is, which is why we are now comfortable offering it for sale. Whilst we would still use the heat gun for building whole looms we have now taken to using this little torch as weapon of choice for smaller jobs. We're hoping that the manufacturers rep has forgotten we have the demonstrator - if not we'll have to buy one!

Colours included: Red, Green, Blue, Yellow, White and Clear
Sizes:
Black only - 1off 15mm x 500mm
All colours - 60off 1.5mm x 35mm, 60off 2.5mm x 100mm, 25off 3.0 mm x 100mm, 20off 5.00mm x 100mm, 10off 6.0mm x 100mm & 10off 10.0mm x 100mm,

Price: £35.52 (Excluding VAT at 20%)

Quantity:

Click for larger image

People who bought this item also bought:

1. Heat Shrink Gun

2. Spark Plug Gapping Tool

3. Motorcycle Relay Tester

Motorcycle Relay Tester

Quickly and accurately tests 4 styles of electro-mechanical relays on most modern bikes, and other vehicles. Simply attach the crock clips to a battery, plug in the suspect relay and press the test button. The tester will repeatedly test the relay automatically. A green LED light tells you the relay is fully functioning and e red tells you that it needs replacing. A switch lets you selct between 4pin and 5 pin relays

• Coil test voltage 9 volts.
• Suitable for various applications including relay coil resistance/relay contacts and cyclic testing. (Not suitable for later Ford 4-pin relay).
• Relay coil resistance 20-50 ohms.
Relay contact resistance threshold 200 milliohms. CE, UKCA & RoHS compliant.

Price: £35.70 (Excluding VAT at 20%)

Quantity:

People who bought this item also bought:

1. Heat Shrink Gun

2. Spark Plug Gapping Tool

3. Testing Jump Leads

4amp Intelligent Battery Charger

A mains powered 4A intelligent battery charger for use on 6V and 12V automotive batteries. Fully automatic, it features a 10-stage charging cycle which monitors the state of the battery and adjusts the charging output to suit. Automatically drops to a trickle charge of <1 amp when the battery is fully charged (a separate maintenance mode is also available) to avoid overcharging.

Suitable for use on motorcycles, cars, vans and boats etc.

• Charges & maintains 6v/12v lead acid, LiFePO4 (Lithium Iron phosphate) AGM & GEL batteries.

• Winter mode for specialised battery charging in cold weather conditions. Automatically drops to a trickle charge of <1 amp when the battery is fully charged (a separate maintenance mode is also available).

• 10-stage fully automatic charging cycle with microprocessor control, adjusts current to match battery type & condition. LCD screen indicates charge level.

• Protection: Overcharging, overheating, short circuits, reverse polarity, low voltage. Insulation Class IP65.

• Supplied with BS plug, crocodile clips with 1.5m (connected) cable & O-ring terminals with quick connector. CE, GS & RoHS compliant.

Price: £41.61 (Excluding VAT at 20%)

Quantity:

People who bought this item also bought:

1. Handle Bar Tie Down Support Strap

2. Spark Plug Gapping Tool

3. Motorcycle Relay Tester

Budget Digital Multimeter

This is not an all signing, all dancing, top of the range multimeter as graces a professional workshop. What it is, is a basic low cost meter that will do most tasks a DIY person will want tracing an electrical fault on their bike. It will also be great around the home.

It measures DC Voltage with 5 ranges, AC voltage with 2 ranges (useful for measuring alternator outputs or main voltage around the home/workshop), DC Current up to 10amps with 5 ranges, resistance with 5 ranges, a diode testing range, which you're most likely to use for connectivity and also there's a transistor tester which you're very unlikely to use. If you knew how to use this function you'd probably buy a more expensive meter.

It's a perfect meter to stick in your luggage when touring.

Price: £4.99 (Excluding VAT at 20%)

Quantity:

20 Amp Automotive Current Tester - Standard Blade Fuse

We think that these little testers are the best thing since sliced bread ! You can test the current drain on any circuit, simply by removing a fuse and inserting the plug. In the case of a bike with a fuse in the charging circuit, you can even test the current the alternator is putting back into the battery. It will measure up to 20amps which is just what you want on a bike. Most multi-meters only test up to 10amps DC, which often isn't enough on a charging circuit.

If your bike doesn't have a fused charging output from the regulator/rectifier it is worth fitting an in-line fuse holder, not only for safety, but also as a port to easily test the charging current. We've been trying to think of a way to overcome the difficulty of testing bike charging for years, and we think that this unique solution is sheer genius.

Price: £19.10 (Excluding VAT at 20%)

Quantity:

Click for larger image

People who bought this item also bought:

1. 33 Piece Screwdriver Bit Set with JIS Bits

2. Motorcycle Relay Tester

Page: << < 1 2 3 4 > >> View All (38) Online Catalogue > Electrical Tools

Electrical Tools

British Brass Bullet Crimp and Fitting Tools

Price: £26.74 (Excluding VAT at 20%)

Electrical Heat Shrink Kit

Price: £35.52 (Excluding VAT at 20%)

Motorcycle Relay Tester

Price: £35.70 (Excluding VAT at 20%)

4amp Intelligent Battery Charger

Price: £41.61 (Excluding VAT at 20%)

Battery Charger Lead

Price: £4.49 (Excluding VAT at 20%)

Budget Digital Multimeter

Price: £4.99 (Excluding VAT at 20%)

Pocket Multimeter

Price: £16.07 (Excluding VAT at 20%)

Laser Multimeter

Price: £26.39 (Excluding VAT at 20%)

Laser Automotive Multimeter

Price: £66.40 (Excluding VAT at 20%)

Electrical Test Leads

Price: £11.47 (Excluding VAT at 20%)

Test Lead Crocodile Clips

Price: £8.37 (Excluding VAT at 20%)

20 Amp Automotive Current Tester - Standard Blade Fuse

Price: £19.10 (Excluding VAT at 20%)