Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Engine Build Tools

Online Catalogue |  Engine Build Tools

Page:   <<   <  1  2  3   View All (33) Page:   <<   <  1  2  3   View All (33)
Bearing / Oil Seal driver

Bearing / Oil Seal driver

A kit for installing bearings and oil seals. This set is made from light weight aluminium and has six different sizes: 40mm, 45mm, 50mm, 59mm, 63mm and 65mm

Price: £43.43 (Excluding VAT at 20%)

Quantity:

Plastic Bearing / Oil Seal Driver

Plastic Bearing / Oil Seal Driver

Plastic bearing and oil seal driver. Aluminium handle with plastic fittings for 9 different bearing / oil seal sizes 39.5mm, 44.5mm, 50mm, 59mm, 63mm, 65,mm, 72mm, 76mm & 81mm.

Price: £39.40 (Excluding VAT at 20%)

Quantity:

Bearing Press Set

Bearing Press Set

This tool is pretty much the same as teh more expensive Laser tool, above, but you need a spanner to use it rather than the supplied handle above. This set used to come with the handle, as can be seen by the case moulding, but they have been able to slash the price by not making the handles.

Using this 9 piece set, bearings are simply pressed in.

There is a bearing seating tool to start off the installation of taper roller bearings.

We have never found such an elegant solution to installing headstock bearings. Before we discovered this tool we spent hours machining up metal on the lathe to install bearings, but this is a fabulous tool ensuring that bearings are installed properly and quickly.



Price: £199.99 (Excluding VAT at 20%)

Quantity:

Graduated Timing Disc

Graduated Timing Disc

Professional graduated timing disc. 171mm diameter with 6mm centre hole

If you want to set up your ignition timing very accurately this is what you will need. If you want to get your valve timing spot on, you could use this to 'degree in' your cams. You will need adjustable cam spockets to achieve this level of cam timing and a piston locking tool.

Price: £23.99 (Excluding VAT at 20%)

Quantity:

TDC Measuring Micrometer Spark Plug Tool

TDC Measuring Micrometer Spark Plug Tool

Essential for precision timing of a two stroke.

Can also be used on two and four stroke engines in conjunction with the graduated timing disc above to assertain acurate TDC (top dead centre). Often factory marks are not particularly accurate.

Designed for 14mm spark plug thread.

Price: £31.29 (Excluding VAT at 20%)

Quantity:

Dial Guage Ignition Timing Set

Dial Guage Ignition Timing Set

Many bikes, especially classic two strokes like Kawasaki H1, H2, S1, S2, S3, KHs etc had inaccurate ignition marks from the factory, some so bad that if you timed the bike from them you would be holing pistons! Many factory workshop manuals admit this. Many set the timing mark as a piston height before TDC (Top Dead Centre). This means that you screw the applicable adapters into the spark plug hole to hold the dial gauge in the correct place and turn the engine over until the piston is shown by the dial gauge indicates the piston to be at the top of the stroke or TDC. You can then turn the engine backwards until the dial indicates that you have dropped the correct amount eg Kawasaki S2 fires with the piston at 2.4mm before TDC (BTDC) and you can then re-mark the flywheel or back plate correctly. This kit contains a dial gauge, extentions for the dial gauge plunger, adapter for the dial gauge and an extention for this adapter and adapters to fit 10mm, 12mm and 14mm plug holes. This is a professional set but, as can be seen from the photo, the plating on some of the adapters leaves a bit to be desired. Whist we don't like the qaulity of finish it is a perfectly useable product at a very good price.

Price: £73.04 (Excluding VAT at 20%)

Quantity:

14mm Piston Locking Tool

14mm Piston Locking Tool

This simple tool is used to detect Top Dead Centre using a graduated timing disc. It fits into a standard 14mm spark plug thread

Price: £5.66 (Excluding VAT at 20%)

Quantity:

12mm Piston Locking tool

12mm Piston Locking tool

This simple tool is used to detect Top Dead Centre using a graduated timing disc.

It fits into a standard 12mm spark plug thread

Price: £6.31 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Heat Shrink Gun
2. Motorcycle Timing Plug Wrench - 22mm
3. 14mm Piston Locking Tool

Professional Piston Ring Expander

Professional Piston Ring Expander

This professional tool makes fitting piston rings much easier and safer. It has an adjustable stop which means that you can set the maximum opening of the jaws so that you can't accidentally open them too far and break the rings. This one is better than the one we show in the video.

Price: £7.66 (Excluding VAT at 20%)

Quantity:

Page:   <<   <  1  2  3   View All (33) Online Catalogue > Engine Build Tools