Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Classic Kawasaki

Online Catalogue |  Classic Kawasaki

Show First 12 Product(s) Show First 12 Product(s)
Classic Kawasaki Fun Stuff
Classic Kawasaki Fun Stuff
Z1 Series Carburettor Rubbers

Z1 Series Carburettor Rubbers

Inlet Manifold Connecting Rubbers made to OEM quality by PMC in Japan

The Set 2x 16065-028,2x 16065-029 59mm between mounting holes, 29mm manifold side ID, 33mm carb side ID, 33mm length.

Suuitable for Z1, Z1A, Z1B, Z900 A4, Z1000 A1, A2, A3, A4, G1, B1, B2, B2, B3, B4, Z1R, Z1000ST and all the Ltds using Mikuni VM carbs.


Price: 62.50 (Excluding VAT at 20%)

Quantity:

Z1 Series Starter Motor Brush Kit

Z1 Series Starter Motor Brush Kit

Starter motor brush Kit for all the Kawasaki Z1 series aircooled fours.

Worn brushes on these starter motors often lead to the motor getting lazy and

The plate size has an outside diameter of 61.4mm and the hole is 40mm


Price: 17.50 (Excluding VAT at 20%)

Quantity:

Dyna S Electronic Ignition for Kawasaki Z1 Series Engine

Dyna S Electronic Ignition for Kawasaki Z1 Series Engine

The beauty of the Dyna S system is that it is simplicity itself to fit. It requires no programming and uses the standard advance/retard on the end of the crank. The points plate is removed and replaced with the Dyna S and the points cam is replaced with the Dyna rotor.

For a proper professional installation we would recommend binning the supplied terminals in favour of proper 3.9mm bullet connectors and running the cable in heat resistant braided sleeve gives a much nicer look and protects the wiring from the heat of the engine.

This system can be either set up statically or dynamically using a stobe timing light. All instructions are included.


Price: 160.00 (Excluding VAT at 20%)

Quantity:

Genuine Kawasaki Z1, Z900 & Z1000 Valve Shim Tool

Genuine Kawasaki Z1, Z900 & Z1000 Valve Shim Tool

This is the genuine Kawasaki special tool, made in Japan, that enables you to replace valve shims without having to remove the camshafts. Ensure that you do read the Kawasaki sorkshop manual before using.

There are plenty Zed manuals to download. The Z1 Owners Club have links to downloadable files for club members on their forum.

Please note the tool in the photo demonstrating use is actually a pattern copy from our own workshop which has been out of production for many years, but is essentially identical to the genuine ones, which have always been difficult to source.



Price: 50.42 (Excluding VAT at 20%)

Quantity:

Regulator Rectifier for Classic Kawasaki

Regulator Rectifier for Classic Kawasaki

This British made regulator/rectifier unit replaces the original rectifier and regulators units in one neat package that is more or less the same foot print as the original rectifier.

The hole spacing dimensions are from 53mm to 66mm. The unit uses modern mosfet technoloy. The three yellow wires connect to the three AC phases from the alternator, the black is negative and the red conects to the battery via the white or white/red connetion on the starter solenoid.

It should be noted that Lithium-Ion battery are NOT compatible with this reg/rec any more than they are with the original system


Price: 66.00 (Excluding VAT at 20%)

Quantity:

Alternator Stator Winding for Z1 Series Kawasakis

Alternator Stator Winding for Z1 Series Kawasakis

Stator winding for alternator as fitted to Z1, Z1A, Z1B, Z900A4, Z1000A1, Z1000A2 and Z1R.Also Limited versions using the original Z series engine.

This British made pattern part comes with a new grommet which should be well bedded in using RTV silicone for a leak free system.

We've fitted dozens of these parts and have found them to be extremely reliable.


Price: 66.00 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 series Ignition Condensor

Kawasaki Z1 series Ignition Condensor

OEM quality, Japanese made ignition condensor for the Kawasaki Z1 series motorcycles.

Equivilent to Kawasaki Pt No 21013-035

Suitable for Z1, Z1A, Z1B, Z900 A4, Z1000 A1 & Z1000 A2


Price: 17.78 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki RHS Contact Breaker

Classic Kawasaki RHS Contact Breaker

For years the only available points for classic bikes were the nasty cheap pattern items that were of deplorable quality or the payment of vital organs for the genuine parts. Now we have available from TourMax OEM standard contact breakers made in Japan. TourMax make a lot of products for bike manufacturers so their wares have to be of first rate standards.

Right Hand Side. Suitable for Z400J, Z500, Z550, Z650, Z900 and Z1000

Corresponds to former Daiichi DT-27R


Price: 11.93 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki LHS Contact Breaker

Classic Kawasaki LHS Contact Breaker

For years the only available points for classic bikes were the nasty cheap pattern items that were of deplorable quality or the payment of vital organs for the genuine parts. Now we have available from TourMax OEM standard contact breakers made in Japan. TourMax make a lot of products for bike manufacturers so their wares have to be of first rate standards.

Left Hand Side. Suitable for Z400J, Z500, Z550, Z650, Z900 and Z1000

Corresponds to former Daiichi DT-27L


Price: 11.93 (Excluding VAT at 20%)

Quantity:

Twin Lead Ignition Coil

Twin Lead Ignition Coil

This may be a cheap ignition coil, but we have been using these coils on our Zeds for years and can't see the point in spending big bucks on coils when these pattern ones work fine.
Ignition Coil 12 Volt Points
Twin Lead 2 Wires
90mm Centre To Centre Mounting Points
Primary resistance is 4.7 ohms
Secondary resistance is 14.5 K-ohms
FITS: Z400D, Z400/Z750B/G Twins,
Z 650 B1-B3, C1-C3,D1-D3, H1, F1.
Z1/Z1A/Z1B,Z900/Z1000.


Price: 31.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki 4 Wire Ignition Switch

Classic Kawasaki 4 Wire Ignition Switch

4 wire ignition switch for earlier classic Kawasaki motorcycles

Price: 15.33 (Excluding VAT at 20%)

Quantity:

Classic Kawaaki 6 Wire Ignition Switch

Classic Kawaaki 6 Wire Ignition Switch

6 pin pattern ignition switch for Z1000 A1, Z1000 A2, Z1000 B1 & Z1000 B2

Price: 13.58 (Excluding VAT at 20%)

Quantity:

NGK B8ES Spark Plug

NGK B8ES Spark Plug

This is the most commonly used spark plug in classic motorcycles of the 70s-80s era.

NGK is the global leader in spark plug production and is synomymous with premium quality.


Price: 1.99 (Excluding VAT at 20%)

Quantity:

NGK B7ES Spark Plug

NGK B7ES Spark Plug

This plug is a grade hotter than the above B8ES, the most commonly used spark plug in classic motorcycles of the 70s-80s era. Because it is hotter it will be less prone to fouling which has become more problematic for classic bikes of the era now, whether down to modern fuels or wear. This is the plugs we run in all our classic Kawasakis

NGK is the global leader in spark plug production and is synomymous with premium quality.


Price: 1.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Indicator Head

Classic Kawasaki Indicator Head

Good quality pattern indicator head for classic Kawasaki Z range of four stroke motorcycles including Z400 twins, Z440 twins, Z650 B, B2, C2, C3, Z750 twins, Z1, Z1A, Z1B, Z900 A4, Z1000 A1 & A2

Price: 13.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Indicator Lense

Classic Kawasaki Indicator Lense

Pattern indicator lens for classic Kawasaki Z range of four stroke motorcycles including Z400 twins, Z440 twins, Z650 B, B2, C2, C3, Z750 twins, Z1, Z1A, Z1B, Z900 A4, Z1000 A1 & A2

Kawasaki Part No 23048-012


Price: 2.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Rear Light Lens

Classic Kawasaki Rear Light Lens

Pattern rear light lens, commonly used on Kawasaki Zs from 1976 onwards. Kawasaki part no 23026-035

Suitable for: Z900A4/B, Z1000A1/A2, Z1000 LTD, MODELS-B1/B2/B3/B4/G1, Z1-R, Z650, Z750B, Z400J/Z550/Z550, Z200, Z250A/B




Price: 9.80 (Excluding VAT at 20%)

Quantity:

Z1 Series Neutral Switch

Z1 Series Neutral Switch

Pattern neutral light switch for Z1, Z1A, Z1B, Z900, Z1000

Kawasaki Part Nos 13151-022 / 13151-1010


Price: 9.73 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Round Front Master Cylinder

Classic Kawasaki Round Front Master Cylinder

We have been using these reproduction master cylinders for quite some time and have found then to be of excellent quality, costing little more than a pattern repair kit.

Suitable for Twin Discs. Bore is 5/8" (15.6mm)


Price: 39.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Square Front Master Cylinder

Classic Kawasaki Square Front Master Cylinder

We have been using these reproduction master cylinders for quite some time and have found then to be of excellent quality, costing little more than a pattern repair kit.

Suitable for Twin Discs. Bore is 5/8" (15.6mm)


Price: 39.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki TRW Brake Pads

Classic Kawasaki TRW Brake Pads

TRW, formally Lucas, organic brake pads that offer superior performance over the pads the bikes originally came with.

Suitable for Z400 G Custom, Z650 B and C, Z750 Twin, Z900A4, Z1000 A1, Z1000A2, Z1R, KH250, KH400, KH500, S2 & S3


Price: 18.37 (Excluding VAT at 20%)

Quantity:

EBC FA062 Brake Pads

EBC FA062 Brake Pads

EBC organic pads are at least as good as OEM pads and some would regard as an upgrade. Manufactured in the UK

Suitable for Kawasaki Z1000 ST and all Z (G) 1300 models. All KZ models are the same

Same fitment as factory no 43082-1004


Price: 15.37 (Excluding VAT at 20%)

Quantity:

EBC FA036 Brake Pads

EBC FA036 Brake Pads

EBC organic pads are at least as good as OEM pads and some would regard as an upgrade. Manufactured in the UK

Suitable for Kawasaki Z500, Z650 all with rear disc brake, Z1000A1, Z1000A2, Z1000 MK2, Z1000 ST, Z1000 H, Z1r (Z1000D) and all Z1300 models. All KZ models are the same

Same fitment as factory no 43050-010


Price: 13.57 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Rear Brake Light Switch

Classic Kawasaki Rear Brake Light Switch

Rear Brake light switch for classic four cylinder Kawasaki Zs

Suitable for : Z400 J, Z500 B, Z550 C Ltd, Z650 B, C & F, Z900 A4, Z1000 A, Z 1000 Mk2, Z1000 H, Z1R


Price: 4.68 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 Series Cam End Plugs

Kawasaki Z1 Series Cam End Plugs

Pattern cam end plugs for the Z1 series engines. This is the same as OEM part No 92066-017 and is supplied in a pack of 4.

If not installed correctly they can leak.The round section that fits in the 'D' shaped cutout in the cylinder heads should be thoroughly degreased using brake cleaner or similar volitile degreaser as should the cutout. This mating surface should be smeared with . The top surface should be coated with whatever gasket jointing compound you use; we use Wellseal which is excellent.

Suitable for Z1, Z1A, Z1B, Z900 A4, Z1000 A1, Z1000 A2, Z1000 D1 and Z1R


Price: 10.99 (Excluding VAT at 20%)

Quantity:

Starter Clutch Repair Kit

Starter Clutch Repair Kit

This is a top quality starter clutch repair kit from Japanese OEM manufacturer TourMax. Depending on the bike they can be easy to fit. Fitting them to a Z1 series bike is a piece of cake providing you have a to remove the alternator rotor. On a Z650 not so easy. The kit comes with 3off springs 92081-110, 3off plugs 92043-087 & 3off hardened rollers 92122-001.

This kit fits a massive number of Kawasaki bikes EN450, EN500, ER500, GPZ500, GPZ750, GPZ750 Turbo, GPZ900R, GT750, KLE500, Z400 twin, Z440, Z650, Z750 Twins & Fours, Z1300, Z1, Z1A, Z1B, Z900A4, Z1000 (All classics) & ZR750 Zephyr
It is also used by a number of classic Hondas including 750/900 fours and CXs and many GS/GSX Suzukis


Price: 25.83 (Excluding VAT at 20%)

Quantity:

Z1 Series Cam Chain

Z1 Series Cam Chain

D.I.D Japanese manufactured endless timing chain for the earlier air cooled Z engines.

An endless cam chain is the best solution for strength and longevity. You do however have to split the crankcases to install it around the crankshaft.

Suitable for Z1, Z1A, Z1B, Z900 A4, Z1000A1, Z1000A2 & Z1R. Also the Limited versions of these bikes.


Price: 32.52 (Excluding VAT at 20%)

Quantity:

Z1A, Z1B, Z900A4 Full Gasket Set

Z1A, Z1B, Z900A4 Full Gasket Set

Athena (Italian made) full gasket set. This well made set contains all the gaskets required for a full bottom up engine rebuild. It contains all the 'O' rings including the wiggly one around the cam chain tunnel.

We rate these set and use them for all our engine rebuilds. We never, however, use valve stem seals from ANY gasket sets. We use Viton stem seals.

Also All the KZ and Limited models using the same engines.


Price: 85.93 (Excluding VAT at 20%)

Quantity:

Z1000 Full Gasket Set

Z1000 Full Gasket Set

Athena (Italian made) full gasket set. This well made set contains all the gaskets required for a full bottom up engine rebuild. It contains all the 'O' rings including the wiggly one around the cam chain tunnel.

We rate these set and use them for all our engine rebuilds. We never, however, use valve stem seals from ANY gasket sets. We use Viton stem seals.

This set is for Z1000 A1, Z1000 A2, Z1000 MK2, Z1000 ST, Z1000 H Injection & Z1R (Z1000 D) Also All the KZ and Limited models using the same engines.


Price: 85.93 (Excluding VAT at 20%)

Quantity:

Classic Kwasaki Exhaust Gasket Set

Classic Kwasaki Exhaust Gasket Set

Set of four composite exhaust manifold gaskets. We prefer these to the copper ones, they seem to seal better.

Suitabel for Z1, Z1A, Z1B, Z900 A4, Z1000 All, Z1100R, Z1100 shaft, GPZ1100 All, GPX750 R & ZXR


Price: 13.50 (Excluding VAT at 20%)

Quantity:

Z900/Z1000 Camcover Gasket

Z900/Z1000 Camcover Gasket

Excellent quality gasket from Italian manufacturer Athena

Suitable for Z1, Z1A, Z1B, Z900 A4, Z1000A1, Z1000A2, & Z1R (Z1000D) Also for KZ and Limited biesk using the '73 - '79 engine


Price: 14.28 (Excluding VAT at 20%)

Quantity:

Kawaakei J Series Z1000/1100 Cam Cover Gasket

Kawaakei J Series Z1000/1100 Cam Cover Gasket

Excellent quality gasket from Italian manufacturer Athena

Suitable for Z1000 J, Z1000 R, Z1000 K, Z1100 shaft, GPZ1100 B & GPZ1100 Unitrak


Price: 26.66 (Excluding VAT at 20%)

Quantity:

Kawasaki Z650 Cam Cover Gasket

Kawasaki Z650 Cam Cover Gasket

Excellent quality gasket from Italian manufacturer Athena

Suitable for Z650 B & C


Price: 16.65 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 Series Alternator Cover Gasket

Kawasaki Z1 Series Alternator Cover Gasket

Excellent quality gasket from Italian manufacturer Athena. For all big aircooled Kawasaki Zeds.

Z1, Z1A, Z1B, Z900 All, Z1000 All, Z1100 All GPZ1100 B & Unitraks



Price: 8.89 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 series Engine Oil Seal Kit

Kawasaki Z1 series Engine Oil Seal Kit

Top quality engine oil seal kit made by Japanese OEM manufacturer TourMax.

Suitable for Z1, Z1A, Z1B, Z900 A4/A5, Z1000 A1/2, Z1R, Z1000 Mk2, Z1000H injection and all Limiteds based on these engine


Price: 31.84 (Excluding VAT at 20%)

Quantity:

Kawasaki Carburettor  Stub Vacuum Pipe Cap

Kawasaki Carburettor Stub Vacuum Pipe Cap

As with all rubber items and riders for that matter, old age is not kind. These do not seal well when old and are a pig to get on and off when synchronising carburettors.

These caps fit a raft of Kawasakis including: EL 252 F Eliminator, EN 500, ER 500, ER 6 F & N, GPZ 500, GPX 600, GPX 750, GPZ 1000 RX, GPZ 1100, GTR 1000, KFX 700, KLE 500. KLE650, KLR 250, KLX 110, KLX 650, Ninja EX 300, VN 900, VN 1500, VN 1600, VN 2000, Vulcan 650, Z300, Z400 J, Z500, Z550, Z650, Z1, Z1A, Z1B, Z900 A4, Z1000 A, Z1000 Mk2, Z1R, Z1000ST, ZR-7 750, ZRX1100/ZRX1200 S, R & C, ZX-10 Tomcat, ZX-12R, ZXR750, ZZR600, ZZR1100 & ZZR1200





Price: 8.68 (Excluding VAT at 20%)

Quantity:

Z1 Series Front Wheel RHS Oil Seal

Z1 Series Front Wheel RHS Oil Seal

Front right hand side wheel bearing seal.

Outside Diameter 40mm, Inside Diameter 25mm Width 8mm

Original part no 654A254008


Price: 3.01 (Excluding VAT at 20%)

Quantity:

Z1 Series Front Wheel LHS Oil Seal

Z1 Series Front Wheel LHS Oil Seal

Front left hand side wheel bearing seal.

Outside Diameter 42mm, Inside Diameter 30mm Width 7mm

Original part no 654A304207


Price: 2.79 (Excluding VAT at 20%)

Quantity:

Z1 Series Rear Wheel LHS Olil Seal

Z1 Series Rear Wheel LHS Olil Seal

Rear left hand side wheel bearing seal.

Outside Diameter 62mm, Inside Diameter 40mm Width 7mm

Original part no 92050-027


Price: 2.79 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Front Fork Oil Seals

Classic Kawasaki Front Fork Oil Seals

OEM quality front fork seals suitable for many seventies and eighties classic Kawasakis including H1Triples, H2 Triples, KH 250s, KH 500s, KL250, KLR250, KLX250, KX125 & 250, Z650 B & C, Z750 Twins, Z1, Z1A, Z1A, Z900A4/5, Z1000A1, Z1000A2, Z1000MK2, Z1000H, Z1R

Original Part number 44009-014 / 920491216


Price: 4.99 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 Series Front Wheel Bearing Set

Kawasaki Z1 Series Front Wheel Bearing Set

Both front wheel bearings for Z1 series motorcycles as well as many other period Kawasaki bikes.

These are top quality Koyo bearings made in Japan and are of at least equal quality to the original.

Outside Diameter 40mm, Inside Diameter 17mm Width 12mm

Kawasaki Part Number 601B6203


Price: 7.50 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Oil Filter

Classic Kawasaki Oil Filter

HiFlo Oil filter HF126 - equivilent to 16099-002

HiFlo is the only filter manufacturer to have its filters tested and certified by TÜV Süddeutschland.

The filters are compared in all relevant criteria with the original Kawasaki filter.

The test can only be successfully passed if the filter from Hiflo meets or exceeds the performance of the OEM original filter.

This is suitable for Z750 Twins, Z1, Z1A, Z1B, Z900 A4, Z1000 A1, Z1000 A2, Z1000 Mk 2, Z1000 ST, Z1000 H, Z1R, Z1300


Price: 3.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Oil Filter

Classic Kawasaki Oil Filter

HiFlo Oil filter HF126 - equivilent to 16099-003

HiFlo is the only filter manufacturer to have its filters tested and certified by TÜV Süddeutschland.

The filters are compared in all relevant criteria with the original Kawasaki filter.

The test can only be successfully passed if the filter from Hiflo meets or exceeds the performance of the OEM original filter.

This is suitable for Kawasaki EL250, GPX600, GPX750, GPZ400 A, GPZ550 A, GPZ 600R, GPZ750, GPZ900 R, GPZ1000RX, GPZ1100 E/F, GPZ1100A Unitrak, GT550, GT750, GTR1000, Ninja 250 R EX,
Z400 b, Z400J, Z440, Z500, Z550, Z650 all, Z750 all, Z1000 J, Z1000 R, Z1100 shaft, ZL600, ZR550 Zephyr, ZR750 Zephyr, ZR1100 Zephyr,ZR-7, ZRX 1100/1200 all, ZX750 turbo, ZX-10, ZXR750, ZZR250, ZZR1100/1200


Price: 3.32 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. 2mm² Thin Wall Cable

Kawasaki Classic Z1000 Air Filter

Kawasaki Classic Z1000 Air Filter

HiFlo Air filter HF2904 - equivilent to 11013-063

HiFlo is the only filter manufacturer to have its filters tested and certified by TÜV Süddeutschland.

The filters are compared in all relevant criteria with the original Kawasaki filter.

The test can only be successfully passed if the filter from Hiflo meets or exceeds the performance of the OEM original filter.

This is suitable for Z1000 A1, Z1000 A2 & Z1R


Price: 12.10 (Excluding VAT at 20%)

Quantity:

Kawasaki Z1 series Clutch Cable

Kawasaki Z1 series Clutch Cable

Eurepean OEM quality replacement clutch cable.

Original part no 54011-048

Fits Kawasaki Z1, Z1A, Z1B, Z900A4/5 and Z1000A1.


Price: 9.18 (Excluding VAT at 20%)

Quantity:

Throttle Cable A for Z1, Z1A, Z1B, Z900 A4

Throttle Cable A for Z1, Z1A, Z1B, Z900 A4

Eurepean OEM quality replacement clutch cable.

Original part no 54012-081

Fits Kawasaki Z1, Z1A, Z1B & Z900A4


Price: 9.18 (Excluding VAT at 20%)

Quantity:

Throttle Cable B for Z1, Z1A, Z1B, Z900 A4

Throttle Cable B for Z1, Z1A, Z1B, Z900 A4

Eurepean OEM quality replacement clutch cable.

Original part no 54012-087

Fits Kawasaki Z1, Z1A, Z1B & Z900A4


Price: 9.18 (Excluding VAT at 20%)

Quantity:

Throttle Cable A for Z1000

Throttle Cable A for Z1000

Eurepean OEM quality replacement clutch cable.

Original part no 54012-1020

Fits Kawasaki Z1000A2, Z1000 MK2 & Z1000 H injection


Price: 9.18 (Excluding VAT at 20%)

Quantity:

Throttle Cable B for Z1000

Throttle Cable B for Z1000

Eurepean OEM quality replacement clutch cable.

Original part no 54012-113

Fits Kawasaki Z1000A2 & Z1000 MK2


Price: 9.91 (Excluding VAT at 20%)

Quantity:

Z1 Series and Z650 Speedo Cable

Z1 Series and Z650 Speedo Cable

European made OEM quality replacement speedometer cable.

Original part no 54001-040

Fits Kawasaki Z650 B1, Z750 Twin, Z1, Z1A, Z1B, Z900 A4, Z1000 A1, Z1000 A2 & Z1R (Z1000D)


Price: 4.99 (Excluding VAT at 20%)

Quantity:

Classic Kawasaki Tacho Cable

Classic Kawasaki Tacho Cable

European made OEM quality replacement rev counter cable.

Original part no 54018-015

Fits Kawasaki EN450 Limited, Z650 All, Z750 Fours, Z1, Z1A, Z1B, Z900 A4, Z1000 A1, Z1000 A2, Z1000 H & Z1000 MK2


Price: 4.99 (Excluding VAT at 20%)

Quantity:

Show First 12 Product(s) Online Catalogue > Classic Kawasaki