Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Workshop Tools

Online Catalogue |  Workshop Tools

Page:   <<   <  1  2  3   View All (36) Page:   <<   <  1  2  3   View All (36)
Heavy Spring Puller Tool

Heavy Spring Puller Tool

This tool is designed to fit and remove drum brake spings, stand springs and exhaust springs. Large comfy handle

Price: 9.75 (Excluding VAT at 20%)

Quantity:

Heavy Spring Puller

Heavy Spring Puller

This is designed for heavy motorcycle springs as the obove tool, but not such an ergonomic handle. Find for rufty tufties of those not encumbered with sensitive hands.

Price: 6.40 (Excluding VAT at 20%)

Quantity:

Soda Blaster

Soda Blaster

Soda blasting is a great way to clean up bike parts as it is very gentle compared with bead blasting, wire brushing etc. We had had a DIY go at soda blasting in the past and were not impressed with the results, so when this new product became available we were more than a little sceptical. When the test unit arrived we gave it a go on a set of painted throttle bodes and we were blown away (pun intended)! We have bought the test unit and are very happy to sell the product. This unit comes with 1Kg of Soda media.

The blasting will not damage glass, rubber or plastic and you need very little masking when blasting. Unlike glass beads the media is not going to damage delicate engine parts. From a mess perspective you would be ill advised to use it indoors, but it is fine to use on the lawn or whereever as the used media is 100% harmless to the environment and will eventually simply blow away.

The manufactures recommends using a compressor capable of providing at least 180 litres/minute or 6.5 CFM; any compressor over 1½ HP should be fine. It is rated for 6 - 12 Bar (87 - 174 psi). We will supply it with either PCL (RHS in photo below) or HiFlo (LHS in photo below) connectors depending on what is on your air line.




Total Price: 90.99 (Excluding VAT at 20%)

Quantity:

Air Line Fitting


People who bought this item also bought:
1. Soda Blast Media - 5KG

Soda Blast Media - 5KG

Soda Blast Media - 5KG

Laser soda blasting media specially intended for blasting with the Soda Blaster above.

You should wear a mask and eye protection when blasting with soda.

Blasting soda is pure Sodium Bicarbonate (NaHCO3), i.e. normal baking soda. It is not dangerous, but may be harmful if inhaled as dust. It is harmless to the environment.

Store in a dry place


Price: 23.84 (Excluding VAT at 20%)

Quantity:


People who bought this item also bought:
1. Soda Blaster

Professional Gear and Bearing Puller Set

Professional Gear and Bearing Puller Set

This high quality puller kit has two sets of drop forged, hardened carbon steel bearing/gear grips in the size ranges of 30-50mm and 50 - 75mm with a hardened, carbon steel yoke. The kit has various extension bars and is very adaptable. We have a set in our workshop and wouldn't be without it.

Price: 148.55 (Excluding VAT at 20%)

Quantity:

Chemical Spray Bottle

Chemical Spray Bottle

This is an invaluable product for a workshop. We have loads of them in our workshop filled with all sorts from brake cleaner to panel wipe.

• Premium quality hand pump sprayer.

• Suitable for use with most brake cleaners, detergents, traffic film removers, penetrating oils and weed killers.

• Viton® seals allow use with a wide range of semi volatile chemicals that would deteriorate standard seals.

• Adjustable nozzle enables a mist to jet pattern, which allows an easy and direct application of liquid exactly where it is required.

• Robust composite construction with a 1L capacity container.


Price: 18.97 (Excluding VAT at 20%)

Quantity:

Quick Blade Change Utility Knife

Quick Blade Change Utility Knife

We love this knife - it has answered all our criticisms of the old "Stanley knife". It has an easily accessible magazine of spare blades that opens up at the press of a button and the blades are also easily swopped at the press of a button. This knife is also superbly ergonomic and a pleasure to use.

It is one of those tools where if you held it in your hand you wouldn't give it back; at least that's what happened when the rep showed it to us!


Price: 12.95 (Excluding VAT at 20%)

Quantity:

Scalpel and 5 Blades

Scalpel and 5 Blades

Swann-Morton have been making the finest quality scalpels and handles in Sheffield, England for over 80 years. Whilst they are obviously most commonly thought of as a medical tool, we have been using them in our workshop for years and can't imagine life without them. The list of uses is literally endless. Common uses are for trimming masking when painting bike parts as well as scraping clean machined surfaces. Whilst they make a huge range of blades and handles, the old No3 handle with 10A blades is undoubtably the most useful. Having worked in graphics and print where these tools are commonplace, we brought them into the bike workshop, where they have been invaluable.

Price: 4.95 (Excluding VAT at 20%)

Quantity:

Seal and 'O' Ring Removal Set

Seal and 'O' Ring Removal Set

We bought this new product a few months ago and have found it to be excellent. It's one of those tool sets you never knew you needed; but now we wouldn't let it out of our workshop for all the tea in China. The product below was fantastic compared with screwdrivers etc - but this set is another ball game. There are tools for every seal we have come across since it's purchase. It not only gets them out more easily but also removes them in such a way that you could re-use them if they were in good condition originally, though we tend to renew seals as a matter of course. For what you get the

Price: 49.42 (Excluding VAT at 20%)

Quantity:

Metric Tap & Die Set

Metric Tap & Die Set

This is a very comprehensive tap and die set which is great for bikes as it has plenty of metric fine threads. The downside is at this price it isn't top end industrial quality, so if you're regularly cutting threads in 316 marine grade stainless, you'll need to dig deeper :) For cleaning out threads and making odd parts and repairs for your project bikes it will be fine. For high quality industrial threading tools you will pay the cost of this set for one size of taps (1st, 2nd taper and plug). A particular bonus with this set is that it has M7 which is uncommon but is often used on motorcycle caliper bleed nipples, which often get neglected and need the threads clearing!

The set has taps and dies to cover the following sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75 and 1/8" NPT x 27 (National Pipe Thread x 27TPI). The set also contain two tap wrenchs, a 25mm die stock, a rubbish screw driver, a rubbish looking centre punch, a useful wire brush and an uber useful thread pitch guage.


Price: 55.34 (Excluding VAT at 20%)

Quantity:

500ml Measuring Jug

500ml Measuring Jug

500ml plastic measuring jug. These jugs are designed to be used with fuel, oil and allied fluids found on motorcycles, so don't risk the wrath of your partner by nicking and ruining the kitchen jugs with fork oil - buy the tool for the job.

Price: 4.19 (Excluding VAT at 20%)

Quantity:

1000ml Measuring Jug

1000ml Measuring Jug

1 litre plastic measuring jug. These jugs are designed to be used with fuel, oil and allied fluids found on motorcycles, so don't risk the wrath of your partner by nicking and ruining the kitchen jugs with fork oil - buy the tool for the job.

Price: 4.89 (Excluding VAT at 20%)

Quantity:

Page:   <<   <  1  2  3   View All (36) Online Catalogue > Workshop Tools