-
files/BTBE081_L_db2f0ed0-2e08-4ee1-b196-44cfda5b44f4.gif
Most bikes have wiring that is necessarily running very close to the hot engine unit and so must be protected and woven heat resistant sleeve is the best way to protect these cables. The standard wire insulation will be damaged over time if note protected which can lead to failures and shorts.
This product is made from braided 'E' glass yarn coated with acrylic resin. It is suitable for continuous heat of 155?C (Class F). It is resistant to abrasion which is important for protecting wiring subject to road debris being fired at it from the tyres.
The 6mm is perfect for three 2mm² wires from an alternator. You can even slip in two 1mm² wires for the neutral switch and oil pressure light if need be, based on using our thin wall wire, though it is little free space. We always finish of the end with a bit of heat shrink which stops the woven heat shrink from moving and looks like a more professional job
We have now introduced 4mm heat resistant sleeve as this is useful when you only have a small number of 1mm² wire for instance points or CDI pickups which have to run against the hot engine.
Sold by the metre
Most bikes have wiring that is necessarily running very close to the hot engine unit and so must be protected and woven heat resistant sleeve is the best way to protect these cables. The standard wire insulation will be damaged over time if note protected which can lead to failures and shorts.
This product is made from braided 'E' glass yarn coated with acrylic resin. It is suitable for continuous heat of 155?C (Class F). It is resistant to abrasion which is important for protecting wiring subject to road debris being fired at it from the tyres.
The 6mm is perfect for three 2mm² wires from an alternator. You can even slip in two 1mm² wires for the neutral switch and oil pressure light if need be, based on using our thin wall wire, though it is little free space. We always finish of the end with a bit of heat shrink which stops the woven heat shrink from moving and looks like a more professional job
We have now introduced 4mm heat resistant sleeve as this is useful when you only have a small number of 1mm² wire for instance points or CDI pickups which have to run against the hot engine.
Sold by the metre
- Regular price
- £2.21
Let customers speak for us
Well no actually!
Nicely weighted Copper/Hide faced hammer. First use for me was to fit the new head race bearings to my Katana.
British made!
And always a chance to chat with Ralph!
Excellent tools, that you can give a whack to a screw to loosen corroded threads without ruining your kit! Great service too, well done Ralph!
Stud extractor worked perfectly. Smooth process from order to delivery. Ralph from Biker Toolbox went above and beyond in helping me. Top man.👍🏻
Great replacement for my old and battered old Vice Grips!
Competitively priced, arrived promptly.
Brilliant service, thanks
Top quality and excellent delivery
Very pleased with these connectors, they bailed me when I needed something to take the place of some proprietary connectors that I could not obtain anywhere.
This crimper does a very reasonable job for the price
