-
files/7220775_L_62cb2e78-1303-4cdd-85aa-9ed4a126ccad.jpg
This is a very comprehensive tap and die set which is great for bikes as it has plenty of metric fine threads. The downside is at this price it isn't top end industrial quality, so if you're regularly cutting threads in 316 marine grade stainless, you'll need to dig deeper :) For cleaning out threads and making odd parts and repairs for your project bikes it will be fine. For high quality industrial threading tools you will pay the cost of this set for one size of taps (1st, 2nd taper and plug). A particular bonus with this set is that it has M7 which is uncommon but is often used on motorcycle caliper bleed nipples, which often get neglected and need the threads clearing!
The set has taps and dies to cover the following sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75 and 1/8" NPT x 27 (National Pipe Thread x 27TPI). The set also contain two tap wrenchs, a 25mm die stock, a rubbish screw driver, a rubbish looking centre punch, a useful wire brush and an uber useful thread pitch guage.
This is a very comprehensive tap and die set which is great for bikes as it has plenty of metric fine threads. The downside is at this price it isn't top end industrial quality, so if you're regularly cutting threads in 316 marine grade stainless, you'll need to dig deeper :) For cleaning out threads and making odd parts and repairs for your project bikes it will be fine. For high quality industrial threading tools you will pay the cost of this set for one size of taps (1st, 2nd taper and plug). A particular bonus with this set is that it has M7 which is uncommon but is often used on motorcycle caliper bleed nipples, which often get neglected and need the threads clearing!
The set has taps and dies to cover the following sizes: M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75 and 1/8" NPT x 27 (National Pipe Thread x 27TPI). The set also contain two tap wrenchs, a 25mm die stock, a rubbish screw driver, a rubbish looking centre punch, a useful wire brush and an uber useful thread pitch guage.
- Regular price
- £91.19
Let customers speak for us
What can I say, Ralph does his research and never stocks anything he doesn’t use himself. He always looks out for the biking community and his prices reflect that, this is a unique service that deserves to be fully supported b my all us home mechanics whenever possible. Top marks for service and top marks for products.
Quality product, fast service. Biker’s toolbox my first stop shop.
Nice tool kit,shipping a little dear -USA. Still nice.
Everything I’ve bought from here has been good quality at a reasonable price and delivered promptly 👍
Had a great conversation regarding my z900 rebuild,very informative
The device worked perfectly monitoring a battery issue that turned out to be due to a newly installed third party entertainment unit. It made it so simple to see what was going on. Worth every penny. I’m sure it will prove invaluable on my bike.
Quick efficient service supplying quality goods 👌
Perfect..
I asked advice from Ralph,before purchase.
I needed a specific set of circlip pliers.
He knew exactly what I needed for the job. They were Perfect.
Job done.
They are smaller than I thought they would be, but they have the levereage and cutting power of anything bigger. An asset to the toolbox, thanks.
It sprays chemicals from its bottle and doesn't leak. It comes in a handy plastic bag and as I bought four, some will be clean until I use them.
It comes in a clever box, with the software separate. The instructions are clear and precise, and I'll be using it in a week or so on my GPZ900r.
